Product Information by Function - TB1346B
TB1346B is an anaerobic reactive adhesive / sealant which cures spontaneously when sealed off from contact with the air between close fitting metallic surfaces. It has been specially developed for locking and sealing threaded parts and fittings with low strength when cured, particularly where frequent disassembly may be required. Its low strength is recommended for fine threads of hydraulic and pneumatic connections, non-ferrous parts in brass or aluminium and for small precision screws. Activator TB3095C should be used to ensure adequate curing in the case of inert substrates or where the bond gap is excessive.
|Product Number||Series||Product Type||Application(s)||Other Features|
|TB1346B|| • 1300||Adhesive|| • Threadlocking/Retaining|| • Automotive Fluid Resistance|
• White Label MSDS
White label MSDS – no irritant marking.
Low strength, frequent removal type.
For bolts and small screws where disassembly with hand tools is required for servicing.
Eliminates mechanical locking parts such as spring or toothed washers, nylon nuts etc.
Reduces required fastening on torque.
Completely seals against oil, water and most chemicals.
Excellent vibration resistance.
- Colour: Blue
- Reaction Type:
- Viscosity: 2,500 mPa.s
- Specific Gravity:
- Skin Over Time:
- Shore Harness:
- Tensile Strength:
- Shear Strength:
- Pressure Resistance:
- Effective Temperature Range: -60°C ~ +150°C
- Cured state:
- Volume Resistivity:
- Dielectric breakdown strength:
- Dielectric constant 1MHz:
- Dissipation Factor 1MHz:
- Thermal conductivity:
- Fixture time: < 10 mins
- Break loose torque: 14 Nm (M10 steel bolt)
- Prevailing torque: 7 Nm (M10 steel bolt)
- Retaining Strength (Steel):
- Max thread size or clearance: M36
- Max clearance:
- Tack free time:
- Tack retain time:
- Lap Shear Strength Steel:
- Peel strength Steel:
- Setting time Metal:
- Setting time Rubber:
- Curing Conditions:
- Glass Transition Point (°C):
- Pencil Hardness:
- Linear expansion coefficient ppm/°C::