Product Information by Function - TB1121
TB1121 is a non-drying liquid gasket on the basis of denatured ester resin developed and patented by ThreeBond from the viewpoints of user safety and easy detachment of joined surfaces. TB1121 is applied on one of the fitting surfaces and can be assembled immediately after application. After assembly of the parts it is completely adapted to the surface structure of the fitting faces. All small indentations, such as tool marks and scratches, are filled in as well as any unevenness of the fitting surface. It exhibits exceptional sealing effect without becoming thin due to solvent evaporation. Further, joined surfaces are easy to separate, resulting in enhanced working efficiency during disassembly.
|Product Number||Series||Product Type||Application(s)||Other Features|
|TB1121|| • 1100 (L)||Sealant|| • Gasketing|
• Thread Sealing
| • Automotive Fluid Resistance|
Entirely free from organic solvents.
Non flammable therefore does not require special storage or transport.
Easy separation of joined surfaces as the product is not solidified by heat.
Does not erode rubber and plastics and can be used together with solid gaskets if necessary.
Excellent chemical resistance, especially to gasoline.
- Colour: Grey
- Disassembly: Easy
- Reaction Type: Non-solvent
- Viscosity: 300 Pa.s
- Specific Gravity: 1.45
- Skin Over Time:
- Shore Harness:
- Tensile Strength:
- Shear Strength:
- Pressure Resistance: 8.8 MPa (15mm flange)
- Effective Temperature Range: -40°C ~ +130°C
- Cured state: Non-drying, Non-elastic
- Volume Resistivity:
- Dielectric breakdown strength:
- Dielectric constant 1MHz:
- Dissipation Factor 1MHz:
- Thermal conductivity:
- Fixture time:
- Break loose torque:
- Prevailing torque:
- Retaining Strength (Steel):
- Max thread size or clearance:
- Max clearance:
- Tack free time:
- Tack retain time:
- Lap Shear Strength Steel:
- Peel strength Steel:
- Setting time Metal:
- Setting time Rubber:
- Curing Conditions:
- Glass Transition Point (°C):
- Pencil Hardness:
- Linear expansion coefficient ppm/°C::