Product Information by Function - TB1375B
TB1375B is an anaerobic reactive adhesive / sealant which cures spontaneously when sealed off from contact with the air between close fitting metallic surfaces. It has been specially developed for bonding and sealing fitted parts with high strength when cured to permanently lock and seal cylindrical assemblies, bearings, gears and pulleys that will not require subsequent disassembly. Activator TB3095C should be used to ensure adequate curing in the case of inert substrates or where the bond gap is excessive.
|Product Number||Series||Product Type||Application(s)||Other Features|
|TB1375B|| • 1300||Adhesive|| • Threadlocking/Retaining|| • Automotive Fluid Resistance|
• High Heat Resistance
High strength locking and sealing of fitted parts such as bearings, gears and pulleys onto shafts.
For retaining cylinder linings, bushes and tubes into castings.
Allows the use of slip fits instead of press and interference fits.
Eases assembly by aiding bearings and bushes to find alignment points.
Prevents fretting and corrosion by completely sealing against oil, water and most chemicals.
Excellent vibration resistance.
- Colour: Green
- Reaction Type:
- Viscosity: 800 mPa.s
- Specific Gravity:
- Skin Over Time:
- Shore Harness:
- Tensile Strength:
- Shear Strength:
- Pressure Resistance:
- Effective Temperature Range: -60°C ~ +175°C
- Cured state:
- Volume Resistivity:
- Dielectric breakdown strength:
- Dielectric constant 1MHz:
- Dissipation Factor 1MHz:
- Thermal conductivity:
- Fixture time: < 10 mins
- Break loose torque: 35 Nm (M10 steel bolt)
- Prevailing torque: 35 Nm (M10 steel bolt)
- Retaining Strength (Steel): 32 MPa
- Max thread size or clearance: 0.3 mm
- Max clearance:
- Tack free time:
- Tack retain time:
- Lap Shear Strength Steel:
- Peel strength Steel:
- Setting time Metal:
- Setting time Rubber:
- Curing Conditions:
- Glass Transition Point (°C):
- Pencil Hardness:
- Linear expansion coefficient ppm/°C::