Product Information - TB1303
TB1303
TB1303 is an anaerobic reactive adhesive / sealant which cures spontaneously when sealed off from contact with the air between close fitting metallic surfaces. It has been specially developed for locking and sealing threaded parts and fittings with high strength when cured to permanently lock and seal stud bolts, various nuts, bearings, gears and pulleys that will not require subsequent disassembly.
Activator TB3095C should be used to ensure adequate curing in the case of inert substrates or where the bond gap is excessive.
Product Information
| Product Number | Series | Product Type | Application(s) | Other Features |
|---|---|---|---|---|
| TB1303 | 1300 series | Adhesives |
|
|
Features
High strength, infrequent removal type.
For studs and bolts.
Eliminates mechanical locking parts such as spring or toothed washers, nylon nuts etc.
Reduces required fastening on torque.
Completely seals against oil, water and most chemicals.
Excellent vibration resistance.
Technical
- Colour: Green
- Disassembly:
- Reaction Type:
- Viscosity: 150 mPa.s
- Specific Gravity:
- Skin Over Time:
- Shore Harness:
- Elongation:
- Tensile Strength:
- Shear Strength:
- Pressure Resistance:
- Effective Temperature Range: -40°C ~ +150°C
- Cured state:
- Volume Resistivity:
- Dielectric breakdown strength:
- Dielectric constant 1MHz:
- Dissipation Factor 1MHz:
- Thermal conductivity:
- Fixture time: < 10 mins
- Break loose torque: 33 Nm (M10 steel bolt)
- Prevailing torque: 35 Nm (M10 steel bolt)
- Retaining Strength (Steel): 35 MPa
- Max thread size or clearance: M12
- Max clearance:
- Tack free time:
- Tack retain time:
- Lap Shear Strength Steel:
- Peel strength Steel:
- Setting time Metal:
- Setting time Rubber:
- Strength:
- Binder:
- Solvent:
- Substrates:
- Curing Conditions:
- Glass Transition Point (°C):
- Pencil Hardness:
- Linear expansion coefficient ppm/°C::