Product Information - TB1388
TB1388
TB1388 is an anaerobic reactive adhesive / sealant which cures spontaneously when sealed off from contact with the air between close fitting metallic surfaces. It has been specially developed for locking and sealing threaded parts and fittings with medium strength when cured, for studs, bolts and bearings particularly where disassembly may be required using hand tools.
Activator TB3095C should be used to ensure adequate curing in the case of inert substrates or where the bond gap is excessive.
Product Information
| Product Number | Series | Product Type | Application(s) | Other Features |
|---|---|---|---|---|
| TB1388 | 1300 series | Adhesives |
|
|
Features
Locking and sealing metallic pipes and threads.
Thixotropic, will not run after application.
Prevents loosening and leakage form shock or vibration.
Technical
- Colour: Green
- Disassembly:
- Reaction Type:
- Viscosity: 3,000 mPa.s
- Specific Gravity:
- Skin Over Time:
- Shore Harness:
- Elongation:
- Tensile Strength:
- Shear Strength:
- Pressure Resistance:
- Effective Temperature Range: -60°C ~ +150°C
- Cured state:
- Volume Resistivity:
- Dielectric breakdown strength:
- Dielectric constant 1MHz:
- Dissipation Factor 1MHz:
- Thermal conductivity:
- Fixture time: < 10 mins
- Break loose torque: 18 Nm (M10 steel bolt)
- Prevailing torque: 20 Nm (M10 steel bolt)
- Retaining Strength (Steel):
- Max thread size or clearance: Up to M36
- Max clearance:
- Tack free time:
- Tack retain time:
- Lap Shear Strength Steel:
- Peel strength Steel:
- Setting time Metal:
- Setting time Rubber:
- Strength:
- Binder:
- Solvent:
- Substrates:
- Curing Conditions:
- Glass Transition Point (°C):
- Pencil Hardness:
- Linear expansion coefficient ppm/°C::