Product Information - TB1207C

TB1207C

TB1207C is a single-component, non-slumping paste, solvent free and non-acid RTV (room temperature vulcanizing) silicone liquid gasket which begins to set in minutes. TB1207C possess superior pressure resistance just after application and assembly. Perfect for sealing cylinder blocks, oil pans, valve covers and T-joint surfaces with large clearances to prevent oil, water, gasoline and chemical leaks. Recommended for frequently serviced parts of all automotive, motorcycle, watercraft, snowmobile and ATV engines.

Product Information

Product Number	Series	Product Type	Application(s)	Other Features
TB1207C	1200 series	Sealants	Gasketing Powertrain Sealing	Automotive Fluid Resistance White Label MSDS

Features

Excellent chemical resistance against coolants and engine oil
Outstanding mechanical and thermal resistance
Excellent adhesion even to slightly polluted surfaces
Extremely fast curing
Instantaneous sealing for pressure-test.
Acceleration of the curing process by heat and contact with the medium
No shrinkage and no generation of corrosive gases
No corrosion of metal and plastics
Easy disassembly

Technical

Colour: Red
Disassembly:
Reaction Type: De-acetone
Viscosity: 70 Pa.s
Specific Gravity: 1.50
Skin Over Time: 5 mins
Shore Harness: A60
Elongation: 170%
Tensile Strength: 4.0 Mpa
Shear Strength: 2.0 MPa (Al)
Pressure Resistance: >10.0 MPa (15mm flange
Effective Temperature Range: -60°C ~ +200°C (+250°C intermittently)
Cured state:
Volume Resistivity:
Dielectric breakdown strength:
Dielectric constant 1MHz:
Dissipation Factor 1MHz:
Thermal conductivity:
Fixture time:
Break loose torque:
Prevailing torque:
Retaining Strength (Steel):
Max thread size or clearance:
Max clearance:
Tack free time:
Tack retain time:
Lap Shear Strength Steel:
Peel strength Steel:
Setting time Metal:
Setting time Rubber:
Strength:
Binder:
Solvent:
Substrates:
Curing Conditions:
Glass Transition Point (°C):
Pencil Hardness:
Linear expansion coefficient ppm/°C::