Product Information - TB1533
TB1533
TB1533 is a multi-purpose, high strength elastic adhesive based on an MS polymer which reacts rapidly upon exposure to moisture in the air and cures to form a toughened elastomer with time. Containing no solvents, plastisizers, or isocyanates, the adhesive has excellent non-staining characteristics against substrates and is over-paintable. It provides excellent weather resistance, high adhesion strength to most substrates without the need for pre-treatment, and is user friendly due to its low odour. In addition to bonding TB1533 can be used for sealing and potting electrical components as no low-molecular siloxanes are produced during curing.
Product Information
Product Number | Series | Product Type | Application(s) | Other Features |
---|---|---|---|---|
TB1533 | 1500 series | Adhesives |
|
|
Features
Materials which can be bonded:
Natural and synthetic rubbers (CR,SBR, EPDM, NBR, etc.)
(Note: The product is not suitable for bonding Polyethylene, Polyacetal and Fluororesin.)
Metals (Steel, Aluminium, Duraluminium, Brass, etc.)
Plastics (Polyvinylchloride, Polymethacrylic, Phenolic resin, Polystyrene, Ebonite, etc.)
Non-metals (Wood, fabrics, leather, ceramics, paper, concrete, mortar, etc.)
Technical
- Colour: White
- Disassembly:
- Reaction Type:
- Viscosity: 100 Pa.s
- Specific Gravity: 1.39
- Skin Over Time: 7 mins
- Shore Harness: 40A
- Elongation: 280%
- Tensile Strength: 4.5 Mpa
- Shear Strength: 5.8 MPa (steel)
- Pressure Resistance:
- Effective Temperature Range: -40°C ~ +120°C
- Cured state:
- Volume Resistivity: 3.2 x 10E10 Ω.m
- Dielectric breakdown strength: 21 MV/m
- Dielectric constant 1MHz: 4.6
- Dissipation Factor 1MHz:
- Thermal conductivity: 0.3 Wm.k
- Fixture time:
- Break loose torque:
- Prevailing torque:
- Retaining Strength (Steel):
- Max thread size or clearance:
- Max clearance:
- Tack free time:
- Tack retain time:
- Lap Shear Strength Steel:
- Peel strength Steel: 3.5 kN/m (Al)
- Setting time Metal:
- Setting time Rubber:
- Strength:
- Binder:
- Solvent:
- Substrates:
- Curing Conditions:
- Glass Transition Point (°C):
- Pencil Hardness:
- Linear expansion coefficient ppm/°C::