Product Information - TB1212
TB1212
TB1212 is a single-component, solventfree and non-acid RTV-Silicone (Room Temperature Vulcanizing) rubber. An oxime neutral cure type, TB1212 can be used for general sealing and adheres well on alkali materials such as mortar and cement. It presents no offensive odour during curing, and will not corrode metal (corrosion of copper based metals may occur when hermetically sealed).
Product Information
| Product Number | Series | Product Type | Application(s) | Other Features |
|---|---|---|---|---|
| TB1212 | 1200 series | Sealants |
|
|
Features
Outstanding mechanical resistance against shear forces
Excellent adhesion even to slightly polluted surfaces
Extremely fast curing
No shrinkage and no generation of corrosive gases
Excellent dispensing and application
Normal disassembly
Technical
- Colour: White
- Disassembly:
- Reaction Type: De-oxime
- Viscosity: 300 Pa.s
- Specific Gravity: 1.05
- Skin Over Time: 7 mins
- Shore Harness: A30
- Elongation: 300%
- Tensile Strength: 2.0 MPa
- Shear Strength: 1.0 MPa (Al)
- Pressure Resistance: >10.0 MPa (15mm flange)
- Effective Temperature Range: >10.0 MPa (15mm flange)
- Cured state:
- Volume Resistivity:
- Dielectric breakdown strength:
- Dielectric constant 1MHz:
- Dissipation Factor 1MHz:
- Thermal conductivity:
- Fixture time:
- Break loose torque:
- Prevailing torque:
- Retaining Strength (Steel):
- Max thread size or clearance:
- Max clearance:
- Tack free time:
- Tack retain time:
- Lap Shear Strength Steel:
- Peel strength Steel:
- Setting time Metal:
- Setting time Rubber:
- Strength:
- Binder:
- Solvent:
- Substrates:
- Curing Conditions:
- Glass Transition Point (°C):
- Pencil Hardness:
- Linear expansion coefficient ppm/°C::