Product Information - TB1281
TB1281
TB1281 is a single-component, solventfree and non-acid liquid gasket on RTV-Silicone basis (Room Temperature Vulcanizing) with low odour. Within a very short time it forms a rubber-like highly elastic gasket completely adapted to the surface structure of the flange face. TB1281 has been designed specifically as an automotive flange sealant with extremely high chemical resistance, for use on gear cases, oil pans and valve covers.
Product Information
| Product Number | Series | Product Type | Application(s) | Other Features |
|---|---|---|---|---|
| TB1281 | 1200 series | Sealants |
|
|
Features
Excellent chemical resistance against gear oil
Outstanding mechanical resistance against shear forces
Excellent adhesion even to slightly polluted surfaces
Extremely fast curing
Instantaneous sealing for pressure- and firing test.
Acceleration of the curing process by heat and contact with the medium
No shrinkage and no generation of corrosive gases
Excellent dispensing and application
Normal disassembly
Technical
- Colour: Red
- Disassembly:
- Reaction Type: De-oxime
- Viscosity: 100 Pa.s
- Specific Gravity: 1.39
- Skin Over Time: 10 mins
- Shore Harness: A60
- Elongation: 190%
- Tensile Strength: 3.1 Mpa
- Shear Strength: 0.9 MPa (Al)
- Pressure Resistance: >10.0 MPa (15mm flange)
- Effective Temperature Range: -60°C ~ +200°C (+250°C intermittently)
- Cured state:
- Volume Resistivity:
- Dielectric breakdown strength:
- Dielectric constant 1MHz:
- Dissipation Factor 1MHz:
- Thermal conductivity:
- Fixture time:
- Break loose torque:
- Prevailing torque:
- Retaining Strength (Steel):
- Max thread size or clearance:
- Max clearance:
- Tack free time:
- Tack retain time:
- Lap Shear Strength Steel:
- Peel strength Steel:
- Setting time Metal:
- Setting time Rubber:
- Strength:
- Binder:
- Solvent:
- Substrates:
- Curing Conditions:
- Glass Transition Point (°C):
- Pencil Hardness:
- Linear expansion coefficient ppm/°C::