Product Information - TB1530C
TB1530C
TB1530C is a single-component, solventfree elastic adhesive on the basis of a silyl-ended polymer which reacts rapidly upon exposure to moisture in the air and cures to form a toughened elastomer with time. Since there are no solvents or plastisizers contained in the adhesive it shows excellent non-staining characteristics against adherends when used as a sealant and is overpaintable. It provides excellent weather resistance, high adhesion strength to most substrates without the need for primer pre-treatment, and is environmentally friendly due to
its low odour and non-isocyanate.
In addition TB1530C can be used for sealing and potting applications for which conventional RTV
rubbers have been used. However, as no low-molecular siloxanes are produced during curing it
will not corrode metals or impair electrical contacts.
Product Information
| Product Number | Series | Product Type | Application(s) | Other Features |
|---|---|---|---|---|
| TB1530C | 1500 series | Adhesives |
|
|
Features
Highly elastic therefore good peel strength impact and vibration resistance
High adhesion strength to metals, plastics, rubbers, wood and inorganic materials
Non-solvent and environmentally friendly
Low odour
One-component, rapid curing
Does not require UV or thermal curing facilities
Low toxicity due to non-isocyanate
Can be over painted
Technical
- Colour: Clear
- Disassembly:
- Reaction Type:
- Viscosity: 100 Pa.s
- Specific Gravity: 1.31
- Skin Over Time: 7 mins
- Shore Harness: 55A
- Elongation: 200%
- Tensile Strength: 4.1 MPa
- Shear Strength: 3.5 MPa
- Pressure Resistance:
- Effective Temperature Range: -40°C ~ +120°C
- Cured state:
- Volume Resistivity:
- Dielectric breakdown strength:
- Dielectric constant 1MHz:
- Dissipation Factor 1MHz:
- Thermal conductivity:
- Fixture time:
- Break loose torque:
- Prevailing torque:
- Retaining Strength (Steel):
- Max thread size or clearance:
- Max clearance:
- Tack free time:
- Tack retain time:
- Lap Shear Strength Steel:
- Peel strength Steel: 2.5 kN/m (Al)
- Setting time Metal:
- Setting time Rubber:
- Strength:
- Binder:
- Solvent:
- Substrates:
- Curing Conditions:
- Glass Transition Point (°C):
- Pencil Hardness:
- Linear expansion coefficient ppm/°C::